CarPro Metallicut has been formulated to provide a fast cutting action with a high gloss finish safe on even the softest of metals. With diamond abrasive powders, and diminishing abrasive compounds. Fast and effective, Metallicut is the go-to metal polish for detailers for exhaust tips, chrome wheels, bumpers and trims. Can be used by hand or by machine to create a better than new shine with a foam polishing pad. Effective on all types of metals including Stainless steel, aluminium, and chrome. Available in 150ml and 500ml. Instructions from CarPro: For use by hand. Apply a small amount of Metallicut to a microfibre towel or wire wool depending on the metal type. Using medium to firm pressure, work Metallicut into the metal surface until the product becomes less opaque. Use a clean microfibre towel to buff away any additional residue to a high shine. Repeat steps 1-3 as necessary. For use by machine. Apply 6-8 drops of Metallicut to a firm foam polishing pad. Spread Metallicut on the surface at speed 1-2. Increase to speed 4-5 to perform the cutting action until the abrasives are broken down and a high gloss is achieved. Using a clean microfibre towel, buff off any excess residue and repeat steps 1-3 as necessary. For use by drill attachment foam cone or buffing wheel. Apply a liberal amount of Metallicut to the chosen tool. Spread Metallicut at low speed. Increase the speed of the drill and use a medium to high speed until the abrasives are broken down. Use a clean microfibre to buff off any excess residue and repeat steps 1-3 as necessary.